Cast Iron T-Slotted Bed Plates Floor Plates Base Plate
Cast Iron T-Slotted bed Plates /Floor Plates are made of Grey Iron Casting from FG200 to FG300 confirming to IS:210. Casting shall be stree relieved after proof machining. Bed plates shall be manufactured with CNC Machines as to achive desired surface flatness and finish at machine itself. Bed Plates shall be manufactured in different sizes and with desired profiles viz T-slots, holes & squared slots as per customer requirement.
Precision: According to the national standards measurement examination regulations execution,
respectively is 1,2,3, fine polish.
| Specification (mm) | Flatness tolerance (um) |
| | | Grade2 | Grade 3 | Finihs plane |
| 1000x750 | | 36 | 90 | |
| 1000x1000 | | 39 | 96 | |
| 1500x1000 | | 48 | 120 | |
| 2000x1000 | | 52 | 129 | |
| 2000x1500 | | 56 | 140 | |
| 2000x2000 | | 60 | 152 | 230 |
| 2500x1500 | | 68 | 168 | 248 |
| 3000x1000 | | | 174 | 248 |
| 3000x2000 | | | 184 | 275 |
| 3000x3000 | | | 210 | 300 |
| 4000x1000 | | | 210 | 300 |
| 4000x2000 | | | 219 | 310 |
| 4000x3000 | | | 240 | 360 |
| 5000x2000 | | | 255 | 375 |
| 5000x3000 | | | 287 | 420 |
| 6000x2000 | | | 293 | 430 |
| 6000x3000 | | | 308 | 460 |
| 8000x2000 | | | 370 | 520 |
| 8000x3000 | | | 382 | 570 |
Installation and adjustment
When used surface plate ,you should first installation debugging,then you can use it . No significance work on surface plate if they aren't properly positioned .Surface plate should setup on level off, firm without shock place .please first put the pad iron down ,then put the surface plate on the pad iron ,removal the wooden case and oil . Measurement with the levelness of the surface plate ,when the surface plate isn't level ,please adjust the pad iron .( In the process of adjusting attention to safety)
Notice for use
1: To the best uniform use of the flat plate throughout, to avoid local grinding concave.
2: Keep the plate clean, prevent be wroned by iron scrap, sand ...
3: Put down workpieces on the plate gently, prevent the flat surface be impacted, once the plate surface hit the workpiece or other objects,repair impact and the convex part immediately.
4: Do not do any hammer work on the surface plate .
5: After use, should be clean it. If long time no use should not be coated with anti rust oil to prevent corrosion.
Product Tags:
|
|
Cast Iron Test 6000 X 2000 Mm T Slotted Bed Plates Images
|
